loading
| Availability: | |
|---|---|
| Quantity: | |
Evaporator
Mingyi
Single-effect evaporator is a common evaporation equipment, mainly used for solution concentration. Drawing on the principle of refrigeration, the energy - carrying medium completes the continuous cycle of gas - liquid - gas in the closed - loop system. During the phase - change process, the medium releases and absorbs heat. The released heat is used for the temperature rise and evaporation of the material liquid, and the absorbed heat comes from the condensation heat of the secondary steam generated by the evaporation of the material liquid. Through the dual - use of cold and heat energy, the concentration of the material liquid, the evaporation of the solvent, and the recovery of the solvent are achieved.
Single-effect evaporator specification
Model | Single-effect evaporation | Evaporate solvent | Power consumption ( KW/h) | Evaporating temperature (℃) | Vacuum degree (MPa) | Weight (T) |
SDR - 1000 | 1000 (Drinking water: 550L) | 70% Ethanol | 55 | 50 - 65 | - 0.05 ~ - 0.09 | 7.5 |
SDR - 2000 | 2000 (Drinking water: 1100L) | 70% Ethanol | 105 | 50 - 65 | - 0.05 ~ - 0.09 | 12.2 |
SDR - 3000 | 3000 (Drinking water: 1600L) | 70% Ethanol | 150 | 50 - 65 | - 0.05 ~ - 0.09 | 14.8 |
SDR - 4000 | 4000 (Drinking water: 2100L) | 70% Ethanol | 200 | 50 - 65 | - 0.05 ~ - 0.09 | 16.2 |
SDR - 5000 | 5000 (Drinking water: 2700L) | 70% Ethanol | 255 | 50 - 65 | - 0.05 ~ - 0.09 | 19.6 |
Single-effect evaporator is a common evaporation equipment, mainly used for solution concentration. Drawing on the principle of refrigeration, the energy - carrying medium completes the continuous cycle of gas - liquid - gas in the closed - loop system. During the phase - change process, the medium releases and absorbs heat. The released heat is used for the temperature rise and evaporation of the material liquid, and the absorbed heat comes from the condensation heat of the secondary steam generated by the evaporation of the material liquid. Through the dual - use of cold and heat energy, the concentration of the material liquid, the evaporation of the solvent, and the recovery of the solvent are achieved.
Single-effect evaporator specification
Model | Single-effect evaporation | Evaporate solvent | Power consumption ( KW/h) | Evaporating temperature (℃) | Vacuum degree (MPa) | Weight (T) |
SDR - 1000 | 1000 (Drinking water: 550L) | 70% Ethanol | 55 | 50 - 65 | - 0.05 ~ - 0.09 | 7.5 |
SDR - 2000 | 2000 (Drinking water: 1100L) | 70% Ethanol | 105 | 50 - 65 | - 0.05 ~ - 0.09 | 12.2 |
SDR - 3000 | 3000 (Drinking water: 1600L) | 70% Ethanol | 150 | 50 - 65 | - 0.05 ~ - 0.09 | 14.8 |
SDR - 4000 | 4000 (Drinking water: 2100L) | 70% Ethanol | 200 | 50 - 65 | - 0.05 ~ - 0.09 | 16.2 |
SDR - 5000 | 5000 (Drinking water: 2700L) | 70% Ethanol | 255 | 50 - 65 | - 0.05 ~ - 0.09 | 19.6 |
Features
1. The equipment requires very little industrial steam pre - heating (electric heating can be used as an alternative) when starting up, and no steam is needed during the normal operation of the equipment, achieving pure electric heating evaporation.
2. The equipment operates at a temperature range of 45 - 65 °C throughout the process, and the evaporation temperature can be adjusted in real - time according to different material properties. Additionally, the heat source for reheating is not higher than 85 °C, which is particularly suitable for the evaporation and concentration of heat - sensitive materials.
3. This set of equipment adopts PLC automatic control, with a high degree of automation and low labor intensity. The whole process can automatically feed, discharge, automatically detect and control density, self - control evaporation temperature, vacuum degree, and other intelligent operations.
4. The equipment is designed and assembled using modularization. Equipment debugging is completed before leaving the factory, and it can work immediately after being connected to the user's supporting equipment when transported to the factory.
5. The equipment has high operational safety. The compressed substance in the device is not a gaseous solvent but a heat - exchange medium for heat exchange with materials, completely avoiding safety hazards. In addition, this set of equipment is designed with full - set electrical explosion - proof, ensuring high safety.
Features
1. The equipment requires very little industrial steam pre - heating (electric heating can be used as an alternative) when starting up, and no steam is needed during the normal operation of the equipment, achieving pure electric heating evaporation.
2. The equipment operates at a temperature range of 45 - 65 °C throughout the process, and the evaporation temperature can be adjusted in real - time according to different material properties. Additionally, the heat source for reheating is not higher than 85 °C, which is particularly suitable for the evaporation and concentration of heat - sensitive materials.
3. This set of equipment adopts PLC automatic control, with a high degree of automation and low labor intensity. The whole process can automatically feed, discharge, automatically detect and control density, self - control evaporation temperature, vacuum degree, and other intelligent operations.
4. The equipment is designed and assembled using modularization. Equipment debugging is completed before leaving the factory, and it can work immediately after being connected to the user's supporting equipment when transported to the factory.
5. The equipment has high operational safety. The compressed substance in the device is not a gaseous solvent but a heat - exchange medium for heat exchange with materials, completely avoiding safety hazards. In addition, this set of equipment is designed with full - set electrical explosion - proof, ensuring high safety.
Why choose us?
I. Energy-saving Advantages
Efficient Energy Utilization: Our evaporator uses advanced heat recovery technology to recycle secondary steam heat, reducing external energy reliance and consumption. Optimized structure and process also cut heat loss, enhancing energy efficiency and saving costs long-term.
Low Energy vs Traditional: Compared to traditional evaporators, ours has much lower energy use for the same evaporation amount. E.g., a traditional one may need 1000 kWh for 1 ton of solution, while ours only 500 - 600 kWh.
Fast Evaporation: With advanced tech, it quickly evaporates solutions regardless of concentration, boosting production efficiency. In chemical production, it speeds up raw material solution concentration and shortens production cycle.
High Rate: It can handle large solution volumes per unit time, vital for large-scale producers. In food processing, like with fruit juice or milk, it ensures continuous and efficient production.
Quality Materials & Tech: We use high-grade materials like stainless steel or corrosion-resistant alloys for solution-contact parts to resist corrosion and wear, extending equipment life. Advanced manufacturing and strict quality checks ensure stable operation.
Stable Operation: It runs stably in different conditions and for various solutions. In pharma and food industries, it guarantees consistent product quality.
Easy to Operate: The design has an intuitive interface and auto control system. Operators can easily start, stop, and set parameters, needing less skill.
Simple to Maintain: The structure allows easy disassembly and assembly of parts for cleaning, repair, and replacement, cutting downtime and raising utilization.
Less Carbon Emission: Its energy efficiency cuts energy use and thus carbon emissions, aligning with environmental and sustainable goals.
Meets Standards: The design and operation meet environmental norms, with no harmful pollutants during operation.
Rich Experience: We have years of evaporator expertise, understanding different industry needs and offering precise solutions. Our many successful client cases ensure stable equipment performance in all scenarios.
Professional Team: Our technical team has deep knowledge in machinery, chemical, automation. They provide services from R&D to after-sales, innovate to keep equipment leading, and customize per client needs.
Why choose us?
I. Energy-saving Advantages
Efficient Energy Utilization: Our evaporator uses advanced heat recovery technology to recycle secondary steam heat, reducing external energy reliance and consumption. Optimized structure and process also cut heat loss, enhancing energy efficiency and saving costs long-term.
Low Energy vs Traditional: Compared to traditional evaporators, ours has much lower energy use for the same evaporation amount. E.g., a traditional one may need 1000 kWh for 1 ton of solution, while ours only 500 - 600 kWh.
Fast Evaporation: With advanced tech, it quickly evaporates solutions regardless of concentration, boosting production efficiency. In chemical production, it speeds up raw material solution concentration and shortens production cycle.
High Rate: It can handle large solution volumes per unit time, vital for large-scale producers. In food processing, like with fruit juice or milk, it ensures continuous and efficient production.
Quality Materials & Tech: We use high-grade materials like stainless steel or corrosion-resistant alloys for solution-contact parts to resist corrosion and wear, extending equipment life. Advanced manufacturing and strict quality checks ensure stable operation.
Stable Operation: It runs stably in different conditions and for various solutions. In pharma and food industries, it guarantees consistent product quality.
Easy to Operate: The design has an intuitive interface and auto control system. Operators can easily start, stop, and set parameters, needing less skill.
Simple to Maintain: The structure allows easy disassembly and assembly of parts for cleaning, repair, and replacement, cutting downtime and raising utilization.
Less Carbon Emission: Its energy efficiency cuts energy use and thus carbon emissions, aligning with environmental and sustainable goals.
Meets Standards: The design and operation meet environmental norms, with no harmful pollutants during operation.
Rich Experience: We have years of evaporator expertise, understanding different industry needs and offering precise solutions. Our many successful client cases ensure stable equipment performance in all scenarios.
Professional Team: Our technical team has deep knowledge in machinery, chemical, automation. They provide services from R&D to after-sales, innovate to keep equipment leading, and customize per client needs.
content is empty!
