Product Category

Contact Us

+86-18002156194

+86-22-84382096

+86-18002156194

sales@minymachine.net

Huaying building, Free Trade Zone, Tianjin, China

Silica Aerogel Insulation Coating Fire Retardant Heat Preservation Painting

Roofing Thermal Insulation Paint Aerogel Waterproof Coating

Aerogel is a solid form of matter, the least dense solid in the world. The density is 3kg/ m3. The common aerogel is silicon aerogel, which was first developed by the American scientist Kistler in 1931. There are many kinds of aerogel, including silicon, carbon, sulfur, metal oxide, metal and so on. aerogel is a combinatorial word, where aero is an adjective meaning to fly, and gel is obviously a gel. It literally means a gel that can fly. gel of any substance can be called aerogel as long as it can be dried to remove the internal solvent, but also can basically keep its shape unchanged, and the product has high porosity and low density.
Since aerogel has many excellent characteristics, it can be developed as industrial products such as insulating quilt and plank; Taking the advantage of extremely low density, aerogel can be used to lower the density of bulk materials like polymer. These derivative products of aerogel can be widely applied to multiple industrial field

Quantity:
Availability:





Inquire Add to Basket

Model:
Aerogel Paint
Brand:
Mingyi

Good Price High Quality Aerogel Insulatin Coating

Aerogel is a solid form of matter, the least dense solid in the world. The density is 3kg/ m3. The common aerogel is silicon aerogel, which was first developed by the American scientist Kistler in 1931. There are many kinds of aerogel, including silicon, carbon, sulfur, metal oxide, metal and so on. aerogel is a combinatorial word, where aero is an adjective meaning to fly, and gel is obviously a gel. It literally means a gel that can fly. gel of any substance can be called aerogel as long as it can be dried to remove the internal solvent, but also can basically keep its shape unchanged, and the product has high porosity and low density.

Description

The aerogel insulation coating is series of products are energy-saving and environment-friendly heat insulation materials. Nano aerogel particles are used to construct a micro negative pressure cavity structure in the coating, so that the product has a low heat conductivity, so that the material has good heat insulation performance, and the surface temperature can be significantly reduced without very thick coating.

Product Type：interior and exterior insulation coating, thick pulp insulation coating, fire retardant coating.

Application Field：Building internal and external thermal insulation, industrial equipment and pipeline thermal insulation, metal structure thermal insulation, etc.

Aerogel insulation painting

Aerogel insulation coating

Characters

Aerogel coatings have several notable characteristics:

Good heat-resistant ability, it can withstand heat up to 600°C
Good corrosion and rusted resistance.
Have single and two components.

Aerogel Insulation Coating Models

Model	Product Name	Application	Specification
MINY08	Nano aerogel insulation coatings for industrial use	Buidling industry and industrial tank, valve, equipment insulation within 200℃.	12KG/25L/barrel
MINY09	Nano aerogel insulation coatings for industrial use	Industrial tank, valve, equipment insulation within 600℃.	12KG/25L/barrel
MINY10	Nano aerogel insulation coating for military industry	Military, aerospace equipment high temperature metal surface	12kg/25L/barrel
MINY11	Nano aerogel insulation coatings for industrial use	Short-term temperature resistance 450 ° C, long-term temperature resistance of 400 ° C or less industrial metal tanks, valves, equipment insulation.	12kg/25L/barrel
MINY12	Nano aerogel insulation coatings for industrial use	Short-term temperature resistance of 600 ° C, long-term temperature resistance of 550 ° C or less industrial metal tanks, valves, equipment insulation.	12kg/25L/barrel

Application

The product can be applied by Spray;Brush;Roller
Mixing ratio:One component - ready to use Two component - A : B = 4 : 13. Film thickness:

Thickness Recommended
Film thickness Typical recommended	Number of coats	2 coats - 3 coats
Film thickness Typical recommended	Film thickness per coats	25µm
Total Film thickness recommendation Typical recommended range	Dry film thickness	50-80µm (≤100µm)
	Dosage	120g - 150g / Sqm

Conditions during application:

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air, measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.

Directions for use:
1. Surface preparation:
The substrate must be sound, clean, dry and free from dust, oil, grease,laitance etc. All traces of form release agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/ loose particles must be removed.
2. Recommended paint system:
Primer: Maydos two component heat-resistant paint: 1 coats - 2 coats
Top Coat: Maydos one component or two component heat-resistant paint:1 coats - 2 coats
3. Remarks: The pot life of two component paint is 4 hours
Use thinner to clean the tools immediately after application Stir well before application
If the paint gets sticky during application, please use Maydos WEH thinner to thin it.

4. Storage & Package:

Storage & Package
Shelf Life	6 months in sealed cans
Storage	Store it in a cool, dry and well-ventilated place.
	Temperature range: -5°C-40°C.

Why Choose the Aerogel Insulation Materials from Our Company?

Outstanding Insulation Performance:

With a unique nano-porous structure, the porosity reaches 90% - 99.8%. The thermal conductivity is as low as 0.017 W/(m·K), far superior to traditional materials such as rock wool and polystyrene foam. In industrial high-temperature pipeline and cold-chain scenarios, it effectively blocks heat transfer, significantly reducing costs and saving energy. Moreover, it is applicable across a wide temperature range and has strong adaptability to various working conditions.

Stable Physical and Chemical Properties:

It has high strength, toughness, and good dimensional stability. It can withstand pressure and vibration, and is resistant to changes in temperature and humidity. Chemically, it is resistant to acid and alkali corrosion, ensuring a long service life in complex environments such as the chemical industry.

Both Safety and Environmental Protection:

It belongs to Class A non-combustible materials, being fireproof and flame-retardant, with no smoke or toxic substances. From production to disposal, it is environmentally friendly, being recyclable or capable of natural degradation without causing harm to the environment.

Industry-University-Research Collaborative Innovation:

We cooperate with Tongji University, Tianjin University and other renowned institutions. We conduct in-depth exploration of the aerogel industry, continuously innovating and improving the formula to enhance the performance of our products, staying at the forefront of the industry.

Precise Quality Control:

We design and manufacture our own production equipment, carefully regulating each stage. From raw materials to the production process, we strictly adhere to standards to ensure high-quality products. We can also customize the shape, size, and performance according to your needs, making it suitable for applications in various fields such as construction, industry, and transportation.